[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
020/02A differences?
This is what I've heard, the cases and the available mounting areas are
different between the 02J and 02A.
I make mounts for the 02J, but there have been lots of requests for the 02A
recently.
If anybody in the MD area has a 4 cylinder 02A sitting in a corner somewhere
I'd make it worth your while to lend it to me for a while. ;^)
What I don't get is that IIRC the 4 cylinder 02A only came with the G60
engine and how many of those did they ever make??
Check out:
http://funksoulkitty.org/engineandtranny/tranny/02j/comparison/comparison.html
http://funksoulkitty.org/engineandtranny/tranny/02j/partscomparison/parts.html
for a comparison of the 02J vs. 020 tranny cases and gears.
In particular note the difference in diameter of the 5th gear pinion shaft
splines.
BTW, a lot of the 02J gears have 02A part numbers so the pictures are
essentially of 02A parts.
Dan
From: "Peter" <peter@thescirocco.com>
To: "Nate Mellom" <doubt@inwave.com>
Cc: "Scirocco list" <scirocco-l@scirocco.org>
Sent: Tuesday, February 13, 2007 9:43 PM
Subject: Re: 020/02A differences?
> 02A's and 02J's share most parts, but the cases and mounts are totally
> different.
>
> Peter - 302.832.8989
> http://thescirocco.com
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>