[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Power module location?



Files sent, Rick.

-----Original Message-----
From: John S. Lagnese [mailto:jlagnese@massed.net] 
Sent: Monday, September 25, 2006 10:12 PM
To: Rick Kellner; 'Scirocco list'
Subject: Re: Power module location?

I'd be interested!
John
----- Original Message ----- 
From: "Rick Kellner" <rfkellner@snet.net>
To: "'Scirocco list'" <scirocco-l@scirocco.org>
Sent: Monday, September 25, 2006 9:25 PM
Subject: RE: Power module location?


> Brian, I have a copy of the schematic and write-up for the 16V
> enrichment module if you or anyone else is interested.  This one is
more
> than the simple relay that kicks in with the WOT switch.  With this
> enrichment device you can set the RPM to start adding fuel, typically
at
> higher RPMs where CIS-E tends to be lean, not at all RPMs when the WOT
> switch is triggered.
> Finally, I am not the author or designer, just happened to have kept
the
> files.  
> Rick.
> 
> 
> -----Original Message-----
> From: Brian McGarvey [mailto:bmcgarvey@gmail.com] 
> Sent: Monday, September 25, 2006 9:28 AM
> To: Scirocco list
> Subject: DIY: Power module location?
> 
> Looking for a link for DIY power module for CIS-lambda
> 
> Thanks
> Bigmac..
> plotting to make CIS programmable.
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>