Cabby fuel pump question

[jdbubb at verizon.net (Dan Bubb)]

Make sure the wire that runs from the coil to the relay is in place. >From terminal 1 on the coil to the small spade contact on the FP relay.
Dan

From: "Behrle Hubbuch" <behrleiii@yahoo.com>
Sent: Thursday, September 21, 2006 1:21 PM
Subject: Re: Cabby fuel pump question


> 
> 
>    FP is supposed to run all the time the car is running :-)
> if you mean that if you turn the ign to the on-position and it runs
> more than briefly..you have the wrong FP relay in it. you need a smart
> one.
> Brian
> 
> I went out to change out the FP relay and found a stupid jumper wire instead of a relay.  Tried the three relays I had on the shelf and no pumping...  I took them out to Dieter and they all worked fine.  What's the next logical thing to check?
>  Behrle 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>