[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[16v] DPR/mixture/timing questions
From: "Nate Mellom" <doubt@inwave.com>
Sent: Monday, March 06, 2006 11:41 PM
>>
>
> Speaking of the temp sender, I've also been having an issue with my
> cooling fan. The car will tend to run quite warm (but never
> overheating), which, if I'm not mistaken, is a symptom of a rich
> mixture. The fan will turn on, but not until it gets quite warm, the
> needle reaching the last quarter of the temp gauge. While all this is
> happening, I've noticed some wispy smoke and a mild ozone/electical
> smell coming from the vicinity of the right (drivers side) of the
> radiatior, down low somewhere. I haven't been able to see it well
> enough to place it. But if I recall Dave's email, the control temp
> sender is on the side of the head, correct?
> Nate
>
The senders for the gauges, oil pressure and water temp, are on the driver's side of the head.
The switch that controls the radiator fan is (ta-da) on the bottom of the driver's side of the radiator, right where your ozone smell is coming from. Probably loose quick connects or anti-freeze or some crap on the contacts.
Dan