Solder, Crimp or Screw terminals?

[badvdub at gmail.com (Parker Wulf)]

I have aways with big cables just crimp it good then heat it up good with a
propane torch, cake it with solder then heat it up again and watch the
metal suck in the solder. works for me

On 7/12/06, Brian Haygood <haygood@myway.com> wrote:
>
>
> So what is going to give me the best connection for battery and ground
> cables?  Solder, Crimp, or Screw terminals?  I have had good luck so far
> with solder terminals, puddling them with solder and dunking hot wire into
> them.  I was looking at using the P3 stuff for some ground wiring on the new
> car, but I don't have faith in the screw terminals.
>
>
>
> What say you?
>
>
>
> Brian
>
>
>
>
>
>
>
> _______________________________________________
> No banners. No pop-ups. No kidding.
> Make My Way  your home on the Web - http://www.myway.com
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>



-- 
Parker Wulf  badvdub@gmail.com
Pequot Lakes, MN
1988 Scirocco 16v 1.8 black(new project)
1987 Scirocco 16v 2.0 red(soon to donate parts to the 88)
1987 Scirocco 16v 1.8 red(part car)