Ring and Pinion from an 8v box fit a 16V?

[roccit_53 at scirocco.cs.uoguelph.ca (C Boyko)]

On 7:55:29 pm 02/04/06 "Dan Bubb" <jdbubb@verizon.net> wrote:
> Yes, it will work but you'll have to change out the driven 4th gear
> (the one on the pinion shaft) to accomodate the smaller 4th gear
> spline on the AOP pinion shaft.
> VW made the 1.13 4th gear ratio (in the AGB) for both types of boxes
> so you just need the one gear.
> Dan
>
WOW! I knew the answer to that! My 3.94 was the same, I needed fourth to
have it put in my AGB. 
Cathy