[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Brake lube



anything silicone based such as silglide (what we use in my shop) will work

On 12/3/06, C Boyko <roccit_53@scirocco.cs.uoguelph.ca> wrote:
>
> I have a high temp bearing grease, use it or wait? It doesn't say it's
> synthetic, but it says its water and heat resistant. I also have regular
> lithium grease. I can't drive the car for a few days anyway, needs more
> parts.
> Cathy
>
>
> On 3:24 pm 12/03/06 "Peter" <peter@thescirocco.com> wrote:
> > Synthetic caliper lube, or any synthetic high temp grease...
> >
> > I've been using a large tube of synthetic Mobil 1 grease for
> > everything.
> >
> > Peter
> >
> > -----Original Message-----
> > From: C Boyko [mailto:roccit_53@scirocco.cs.uoguelph.ca]
> > Sent: Sunday, December 03, 2006 2:52 PM
> > To: scirocco-l@scirocco.org
> > Subject: Brake lube
> >
> > Yeah, seriously. What specific lube should be used for those guide
> > pins (on calipers), and is anything suggested for where the pads ride
> > on the carrier? Just wondering while I have the car apart for the
> > next few days, may as well clean everything up well and lube as
> > needed. (this is the MkIV Rocc).
> > Thanks, Cathy
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>