[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Shift linkage, was Re: Working in the heat!
- Subject: Shift linkage, was Re: Working in the heat!
- From: nettlesre at gmail.com (Robert Nettles)
- Date: Mon Aug 7 22:05:03 2006
- In-reply-to: <003701c6ba4c$a0a75700$b709b9d0@4WAVE>
Nice job Don.
I have a used set available (weighted) if any one's interested.
http://scirocco.dyn.dhs.org/vw/list/rob_N/MK%20II%20Parts/images/MK%20II%20S
hort%20Shift.jpg
-Rob
-----Original Message-----
From: Dan Bubb [mailto:jdbubb@verizon.net]
Sent: Monday, August 07, 2006 1:09 PM
To: roccit_53@scirocco.cs.uoguelph.ca
Cc: scirocco-l@scirocco.org
Subject: Shift linkage, was Re: Working in the heat!
Well, if they're Teflon lined then no.
Otherwise I'd think they'd need some sort of lubrication, but the underhood
environment with all the dust and dirt isn't going to be a good place for
any exposed lubrication since it'll catch the dirt and carry it into the
bearings.
I'd leave them unlubricated.
Personally I'm using shielded rod ends from McMaster Carr, PN 6058K42.
Dan
From: "C Boyko" <roccit_53@scirocco.cs.uoguelph.ca>
Sent: Monday, August 07, 2006 10:49 AM
Subject: Re: Working in the heat!
> I imagine the Scott Williams version is similar, as Scott Rose doesn't do
> them anymore. Do those joints need any sort of lube?
>
> Cathy
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l