Feeler: MS unit with harness

[jdbubb at verizon.net (Dan Bubb)]

Do the datalogs show consistent RPM change or is the RPM just jumping around???
I thought I modified your unit for a hall sensor ignition input, but it sounds like you're using the crank wheel and VR sensor for an input. Did T3bunny modify it again, or is my memory effed up?
Are the ignition sensor wires shielded and is the shield grounded?
Dan

From: "Derrick floyd" <tyrone27@gmail.com>
Sent: Friday, April 07, 2006 7:08 AM
Subject: Re: Feeler: MS unit with harness


the fuel part mostly.  I need to find someone with MS extra that is runing
there spark setup like mine to test this unit in a car.

On 4/7/06, Dan Bubb <jdbubb@verizon.net> wrote:
>
> WHAT couldn't you get to run right?
> You haven't even had the thing in for a week and you're giving up?
> What part doesn't work?
>
>
> From: "Derrick floyd" <tyrone27@gmail.com>
> Sent: Thursday, April 06, 2006 9:21 PM
>
>
> yup couldn't get it to run right.  so i'm going back to tec2
>
> On 4/6/06, Roger <rogercv1@gmail.com> wrote:
> >
> > why are you selling it??? didnt you just install it???
> >
> > On 4/6/06, Derrick floyd <tyrone27@gmail.com> wrote:
> > > I'm just putting this out there to see how much I can probably get for
> > my
> > > equipment. I have a MS-1 unit made by Dan bubb and modified my t3
> bunny.
> > >
> > > Wire harness was made by T3bunny and its a complete plug and play
> > harness
> > > for a scirocco 16v.
> > >
> > > here are the pics:
> > >
> > > http://forum.vwsport.com/pics/data/500/medium/100_0351.JPG
> > > http://forum.vwsport.com/pics/data/500/medium/100_0350.JPG
> > > http://forum.vwsport.com/pics/data/500/medium/IMAG0020.JPG
> > > _______________________________________________
>
>