Poor cold start in an 8V

[patrick.bureau at gmail.com (Patrick Bureau)]

Being frenmch is not always amusing, I met use a dwell meter/tester and
check your duty cycle.
(bentley 85-88, p5-30, sec 5.7)
 check the following;
 1) test fuel injectors check for clogged injector line
2) fuel pressure, testing control pressure regulator
3) Cold start valve
4) Auxiliary Air regulator
5) Vaccum leak (intake air)
6) Timing
7) duty cycle
 as for dwell, check the bentley for the procedure, but I reccomend
 a) timind set to tdc
b) test air/mix
c) frequency valve duty cycle
 I cannot get more explanative without copying bentley pages...sorry
 Patrick