unbolting seat in 16v

[rocco16 at sbcglobal.net (Larry Fry)]

> Super easy, First, slide the seat all the way forward and remove the
> plastic that protects the seat rail (behind the seat, inboard side of the
> seat). There may be a screw on it that needs removing. Next, there is a
> little bolt on the very front of the seat, it's really just more of a stop
> that keeps the seat from sliding off the track. You want to remove it, and
> then slide the puppy back till it comes off the track. If the seat doesn't
> slide easily on the track, a bit of convincing with a hammer will give it
> motivation. There is a wire for the seatbelt light under there too, so
> unhook it, and lift the seat out. Easy!
> Cathy>

 Keep in mind, if the seat has never been removed before...there will 
probably be lots of white grease on those tracks.  Make sure you don't get 
this all over the carpet.  :)

Larry
sandiego16v