unbolting seat in 16v

[roccit_53 at scirocco.cs.uoguelph.ca (C Boyko)]

On 6:40:40 am 05/24/05 "Patrick " <pgronau1@cox.net> wrote:
> Ok I found a place to redo my seat in my 16v. I am at work right now
> and don't have access to the car or the Bentley at the moment can
> someone send instructions on how to remove the drivers seat in an 87
> 16v scirocco?? Thanks Patrick
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>

Super easy, First, slide the seat all the way forward and remove the
plastic that protects the seat rail (behind the seat, inboard side of the
seat). There may be a screw on it that needs removing. Next, there is a
little bolt on the very front of the seat, it's really just more of a stop
that keeps the seat from sliding off the track. You want to remove it, and
then slide the puppy back till it comes off the track. If the seat doesn't
slide easily on the track, a bit of convincing with a hammer will give it
motivation. There is a wire for the seatbelt light under there too, so
unhook it, and lift the seat out. Easy!

Cathy