*snap* goes the bolt

[tyrone27 at gmail.com (Derrick floyd)]

I'm using a smaller bolt.

On 5/8/05, Jim Jarrett <jarrett@rpa.net> wrote:
> On 5/8/05 7:28 AM, "Derrick floyd" <tyrone27@gmail.com> wrote:
> 
> > when I broke mine I just used a regular lock nut and bolt from home
> > depot.  the lock nut keeps it from moving so it won't bind up the
> > bushings.
> >
> 
> I tried that, but the holes the bolt passes through are two different sizes;
> if I get a bolt big enough to fit the top and fill the bushings, then it
> won't pass through the bottom hole.  I figured if I used the bolt small
> enough to pass thru the bottom hole, then the relay lever would slop around.
> 
> 
> /===============================================================\
> | Jim Jarrett,McFarland, WI      '94 Passat GLX                 |
> | mailto:jarrett@rpa.net         '86 Scirocco                   |
> |                                '81 Rabbit Convertible 16v     |
> |    Any problem can be solved with the proper application of   |
> |   Force, Heat, Chemicals, or Money.                           |
> \===============================================================/
> 
>