[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: $150 aba here in OH
- To: scirocco-l@scirocco.org
- Subject: RE: $150 aba here in OH
- From: Anson Clement <ansonivan@yahoo.com>
- Date: Fri, 11 Mar 2005 07:04:06 -0800 (PST)
- Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys
- Delivered-to: getty@richard2.pil.net
- Delivered-to: getty-marc@getty.net
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; b=rd+9L/9l/r0Ho0FDTZKEo1bbchR8uFy3gVttRyabozRMP+hmhEV4h3obEYxBXW1/grFBMjIOmJDxmr7WX48yr7utwpVwfGaUTJiBGE4GuxBVDjhpynw5P33J3QHX1eyY4+fHdYIt/JEqjsEv00VA4YhefAWPjz547KnXt68kMvA= ;
- In-reply-to: 6667
- Sender: scirocco-l-bounces@scirocco.org
Unfortunately it's not quite that simple, the ABA is an 8V motor so bolting on a 16v head would drop the compression to around 8.2:1 at best.
Great for a turbo motor but not so much for N/A you also need to install a 16v intermediate shaft to make it work.
This is a nice easy bolt in for the 8v guys but realy requires new pistons to work properly in a 16v application..... if you do want to spend the cheddar though it will make some fucking huge power.
Anson
Jim Ruffi <sciroccos@earthlink.net> wrote:
Just curious:
What is the net gain that I should expect from an aba bottom with a 1.8 16V
head, versus the std 1.8 stock 16V?
....more torque....noticeable?
thx
Jim
-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Anson Clement
Sent: Friday, March 11, 2005 9:44 AM
To: scirocco-l@scirocco.org
Subject: fs: $150 aba here in OH
http://www.ohiovw.com/forums/topic.asp?TOPIC_ID=21585
I can bring it to Cincy for you....
Anson
---------------------------------
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn more.
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l