[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

1.8t... anyone try to fit a 16v head?



 OK, second option.  9a block and head, stacked gaskets; can it be
swapped into that car using the 1.8t intake/exhaust/etc.?  

-----Original Message-----
From: Brian McGarvey [mailto:bmcgarvey@gmail.com] 
Sent: Tuesday, June 21, 2005 11:27 PM
To: Miller, Chris
Cc: scirocco-l@scirocco.org
Subject: Re: 1.8t... anyone try to fit a 16v head?

The pistons dont have the right clearance, and there 3 oil drains in the
back that dont match..
fix the valves ... its cheaper..


On 6/21/05, Miller, Chris <chris.miller@infofoundry.com> wrote:
> Friend with a 1.8 t bent some valves; I have a good 2.0 liter head off

> a Passat.  Anyone ever try to replace the 20v head with a 16v?