[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

CIS Lambda to straight CIS conversion



That's kinda what I figured, glad to hear you found the real issue. The
added metering from the O2 sensor was the biggest factor when I changed, and
availability of the parts- they were in my driveway. Jeff

----- Original Message -----
From: "Cris Carpenter" <ccarpen@earthlink.net>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, July 12, 2005 9:28 AM
Subject: Re: CIS Lambda to straight CIS conversion


> I just wanted to find an easy way to get around the problem of the
> frequency valve not working. I finally broke down and diagnosed the
> problem. After verifying the relay was supplying power to the system and
> trying a known good frequency valve, I ran a pin test back from the
control
> unit and found the ground at the cold start injector was the problem. The
> power is back!