Motor mount and (8v) water pipe woes....

[dan.bubb at gmail.com (Dan Bubb)]

I'm with you on the hose clamps.
Where do you get them???
Dan

On 12/17/05, Jim Ruffi <sciroccos@earthlink.net> wrote:
> UPDATE:
>
> I jammed the hoses on the larger pipe.  I still don't like it, but it works.
> I have to investigate the possiblity that a different (possibly an A2
> Golf/Jetta?) 3 way hose will fit properly, as Dan mentioned.  The same goes
> for the stubby heater valve to pipe hose on the opposite end.
>
> Slightly OT and in the "neurotic" category:  I have a good stock of GEM,
> Zebra and Norma hose clamps here, which are the thinner OE clamps with the
> rolled edges.  I like these so much more that the standard US ones.  :-)
>
> Jim
>
> >-----Original Message-----
> >From: David Utley [mailto:fahrvergnugen@cox.net]
> >Sent: Wednesday, December 14, 2005 10:28 PM
> >To: Jim Ruffi; Phil Boeye; Scirocco List
> >Subject: Re: Motor mount and (8v) water pipe woes....
> >
> >
> >Boy, I don't have a clue what they are doing.  That pipe should
> >only fit the
> >Jettas and Golfs.  That cap could be used on a Passat 16V, but the pipe
> >itself is not that number, NOR is it the correct 16V Scirocco pipe (I am
> >assuming that is what you needed it for).  16V is 027-121-065-K, and 8V is
> >027-121-065-A.
> >
> >Besides, I thought we got you a pipe already, or am I thinking I did this
> >for another lister?  I can't remember...
> >
> >
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>