[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Replacing belts - One Hex Bolt



I usually use a short socket 8mm, and use a long handle 8mm wrench to turn
it, slow but works nicely


-----Original Message-----
From: scirocco-l-bounces+patrick.bureau=gmail.com@scirocco.org
[mailto:scirocco-l-bounces+patrick.bureau=gmail.com@scirocco.org] On Behalf
Of Don Walter
Sent: Sunday, August 28, 2005 10:05 AM
To: Scirocco List
Subject: Replacing belts - One Hex Bolt

Trying to replace the bolts on my sons scirocco. There is one bolt on the 
passenger side for the Air Conditioner that has an 8mm allen hex bolt. I 
have an SK 3/8" socket that has the 8mm allen but it is a bit long and I 
can't get the rachet on it because there is not enough room to get it on. 
How has anyone else gotton this out? Today we are going to the hardware 
store to find a shorter socket with an 8mm on it. Then I am replacing it 
with a Hex Head Bolt which is the way the other one I have worked on was and

is much easier to get to.

-- 
Don Walter - Waukesha, WI
1986 2.0L 16V TEC 2 Black Scirocco (see progress at 
http://www.cardomain.com/memberpage/708939)
1986 2L 16V Toronado Red Scirocco (under repair)
1988 1.8 16V Toronado Red Scirocco (sold on 3/29/04)
1984 1.8 8V Pewter Scirocco (sold years ago)
1971 Karman Ghia (sold)
1969 Karman Ghia (sold)
1969 Beetle (sold)
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l