16V electrical gurus needed...

[amalventano1 at tds.net (Allyn)]

> Allyn <amalventano1@tds.net> wrote:
> > 25 ohms is extremely high on the ground circuit.
> > Al
> 
> Ditto.  Run a separate ground wire as a test.  You may have corrossion
> where the ground wires
>  are lugged (under the insulation near the end of the wire), or where the
> lugs connect.
> Ron

...or the ground wire may have just corroded itself into a nice 25 ohm
resistor. Braided copper with no shielding will do that over 20 years.
Al