2nd Clutch cable to break

[Gretsch60s at aol.com (Gretsch60s@aol.com)]

In a message dated 8/24/05 7:48:43 AM Eastern Daylight Time, 
scirocco-l-request@scirocco.org writes:

> Re: 2nd Clutch cable to break

Check the tack welds on the tube first & second, check all the nuts holding 
the pedals to the firewall are snug.  From the sounds of the pedal feeling 
fine, I would back up the argument that the tack welds prolly broke... Definitely 
take it out to weld it back, there's about 10-12 nuts holding the pedal 
cluster and steering column up.  The bad part is that you gotta dissasemble the 
master cylinder bracket & booster to the get pedals out.  At least you get to 
bleed your breaks and go over them though, right?? heh

Good luck. 

PS- where are you located?  I do service work like this all the time.  
Contact: Gretsch60s@aol.com

Jim
'88 16v
'81S 16v