Quick question.

[rocco16 at sbcglobal.net (Larry Fry)]

ok, sounds good  (as long as you are grounding the correct terminal of the 
relay...)

Larry
sandiego16v



> I'm going to draw 12V+ from the ignition
> to the switch, then ground out the small terminal on the switch(so the
> little light comes on when the switch is in the on position). I then run 
> the
> 12V+ from the other terminal(it's only hot when the switch is on) out to 
> the
> relay. The relay will have power from the battery that's going to the fog
> lights when they're on, and the fog lights themselves will be grounded. 
> Now
> after the 12V+ from the switch goes into the relay, I'm just grounding out
> the other side of the relay, right??   Something doesn't seem quite right
> there.
>
> I just need an "Ok, sounds good" or HOLY SHIT DON'T DO THAT!!    lol