Missing fan speeds

[ydrogs at gmail.com (Gordy Stedman)]

Just got back from PnP yard and right when I was leaving the fork lift
guy dropped a brown 83 down.  I pulled the fan switch and plug, heater
control knobs and the heater control pannel.  Bad new is it is only a
3 speed switch.  It is yours if you want it.

On Apr 8, 2005 8:50 PM, Nate Mellom <doubt@inwave.com> wrote:
> I had to replace the blower fan, as my old one had some busted
> connections.  Problem is now, I only have one fan speed, speed 3.  I've
> checked voltage at the fan connections, and am only getting voltage at
> that switch position (around 9v if I remember right), and no voltage at
> speeds 1, 2 or 4.  Am I looking at a new fan speed switch?  I don't
> think its the resistor, but I've been wrong before...
> Any one got one laying around to donate to the cause?  Might be a PnP
> item too....
> Nate
> '81
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 


-- 
Gordy

MK1 x 3