50 MM Euro Intake?

[amalventano at sc.rr.com (Allyn)]

shifts the torque (and thus HP) curve to the right (peak at higher rpm).
it would have better effect where other mods were involved - other mods that 
would have done better with a higher torque peak anyhow.
i stuck with the stock intake on the rieger, even with the 2.0 and exhaust, 
due to the better low end torque that it provides.
hth
Al

----- Original Message ----- 
From: "Rick Kellner" <rfkellner@snet.net>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, September 14, 2004 12:16 PM
Subject: 50 MM Euro Intake?


>I have looked at some of the archives regarding this subject and have
> not found any decisive conclusions.  Does anyone have any first hand
> information regarding the 50 MM Euro intake?
> What is the benefit of a 50MM intake on a 2.0l 16v?  Other than looking
> really nice, how much HP does it add?  How much is its benefit is
> dependant on other mods such as cams, porting and exhaust?  As with all
> 'benefits' there are always 'costs', other than price, what are the
> 'costs', low end torque?
> Thanks, Rick.
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l