Anyone know how to dissolve window/metal glue?

[area53 at validpath.com (Jeff Toomasson)]

Believe me - I am VERY familiar w/ the 3M stuff - I've been messing w/ for the 
last few months almost exclusively!! But it only works after you've freed the 
mating surfaces from each other...

JT

> 
>> 
>> From: Mark <mardak@cogeco.ca>
>> Date: 2004/09/06 Mon PM 04:23:34 EDT
> 
>  
>> An aggressive "Goo-gone" might also do the trick (isn't there a 3M 
>> product that dissolves glue?), but it might be difficult since it would 
>> have to "creep" to access the glue in the middle.  Several applications 
>> might do the trick.
> 
> 
> Yes, there is.   3M adhesive remover...  It works well, I have touted its'
> abilities here many times...  I had a set of Borbet C knock-offs that I
> cleaned with it.  Lots of stubborn brake dust and wheel grime from many
> years lack of proper cleaning...  It is expensive, about 10.00 for a quart
> (IIRC)...  But it goes a long ways...
> 
> David
> 
> 
> 
> ---Chrome don't get you home.---