questions on removing fuel distro

[area53 at validpath.com (Jeff Toomasson)]

Did you open the gas tank cap to relieve the system pressure before you broke 
the lines?  (BTDT)

HTH, JT

> While soaking various bits in PB Blaster I decided to start pulling the
> fueling bits. I only broke 1 injector, which I think is pretty good and
> disconnected all the lines. One line however refuses to stop leaking gas.
> It's the one that connects onto the same bolt as another line on the fuel
> distro and runs down and under the car. I figured there'd be some gas left
> in the line so I got it into a jar and waited until it stopped dripping. I
> figured it was all drained then. Well, today is around 80 and the heat
> seems to have started a small fountain of gas spewing again. I've connected
> the line to the fuel pump (filter maybe? the small grey cylinder in the
> same area) and hopefully this will at least keep the fuel from dripping on
> the ground. Aside from draining the tank, how do I stop this line from
> flowing?
>  
> Dan
> 
> 		
> ---------------------------------
> Do you Yahoo!?
> Win a $20,000 Career Makeover at Yahoo! HotJobs 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l