[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Autotech cam fitment q's
- Subject: Autotech cam fitment q's
- From: ats at longcoeur.com (Patrick Bureau)
- Date: Mon Mar 29 23:32:43 2004
- In-reply-to: <4068D686.6000302@inwave.com>
Last time I talked to a cam shop the largestyou can go without changing the
springs is 268, but they also mentioned that in the long run I would be
better of upgrade
-
ATS - Patrick Bureau - http://ats.longcoeur.com -
A1 eBay Sales: http://tinyurl.com/22e5b
->-----Original Message-----
->From: scirocco-l-bounces@scirocco.org
->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Nate Mellom
->Sent: Monday, March 29, 2004 8:08 PM
->To: Scirocco list
->Subject: Autotech cam fitment q's
->
->Collective,
->I'm planning on replacing my timing belt soon on my '81 (1.7
->FN), and I thunk I should also install my Autotech 268 cam
->and Neuspeed cam gear out of my '84. Question is, do I need
->heavy duty valve springs to make it work, or would I be safe
->using my stock springs?
->Thanks!
->Nate
->
->
->
->
->_______________________________________________
->Scirocco-l mailing list
->Scirocco-l@scirocco.org
->http://neubayern.net/mailman/listinfo/scirocco-l
->
->