[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Need to source a 11mm triple square and more explicit 3A

Subject: Need to source a 11mm triple square and more explicit 3A
From: ats at longcoeur.com (Patrick Bureau)
Date: Fri Mar 26 08:05:06 2004
In-reply-to: <Pine.LNX.4.44.0403260834290.1689-100000@localhost.localdomain>

If you  noticed the email are posted at 7am and I get up at 5am, the
livestock (horses in my case) get thendered between 5-7, then I get to get
coffee and eamils runs.


---
ATS - Patrick Bureau -  Web site :
http://ats.longcoeur.com]http://ats.longcoeur.com
AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: atsgtx@hotmail.com
See what I am selling today on eBay: http://tinyurl.com/22e5b

 

->-----Original Message-----
->From: Drew MacPherson [mailto:drew@scirocco.cs.uoguelph.ca] 
->Sent: Friday, March 26, 2004 7:36 AM
->To: Patrick Bureau
->Cc: 'scirocco list'
->Subject: RE: Need to source a 11mm triple square and more explicit 3A
->
->OK Pat, I'll bite.  If you work like a farmer, what the hell 
->are you doing on the computer in the morning... shouldn't you 
->be out tending to the livestock? :)
->
->Drew (who lives on a farm, gets up at 5am everyday to go to a 
->job that pays, then comes home to work on the farm evenings 
->and weeknds... and holidays... and days off... and sick 
->days.... and so on...)
->
->Drew
->
->
->On Fri, 26 Mar 2004, Patrick Bureau wrote:
->
->> Live on a farm, live like a farmer, up at 5am everyday work on farm 
->> until 11, go to work at 1pm until 9pm get home at 10pm, 
->work on farm 
->> until midnight, repeat!
->> 
->> Cheers!
->> 
->> 
->> ---
->> ATS - Patrick Bureau -  Web site :
->> http://ats.longcoeur.com]http://ats.longcoeur.com
->> AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: 
->> atsgtx@hotmail.com See what I am selling today on eBay: 
->> http://tinyurl.com/22e5b
->> 
->>  
->> 
->> ->-----Original Message-----
->> ->From: Drew MacPherson [mailto:drew@scirocco.cs.uoguelph.ca]
->> ->Sent: Friday, March 26, 2004 7:09 AM
->> ->To: Patrick Bureau
->> ->Cc: 'scirocco list'
->> ->Subject: RE: Need to source a 11mm triple square and more 
->explicit 
->> ->3A
->> ->
->> ->
->> ->Pat, you just start too damned early in the morning... :)
->> ->
->> ->BTW, your observation does hold true for diesel head 
->bolts since '81 
->> ->- they're a 12X1,75mm bolt that uses a 12pt 12mm triple 
->square... :)
->> ->
->> ->Drew
->> ->
->> ->On Fri, 26 Mar 2004, Patrick Bureau wrote:
->> ->
->> ->> But I am dumb, The head is 12mm indeed, duh!
->> ->> 
->> ->> www.germanautoparts.com states on their tools section
->> ->> "12 point triple-square drive bit - For head bolts and
->> ->starter bolts
->> ->> on some models. This is not a Torx bit, it is a 12-point
->> ->star shaped
->> ->> bit correct for these bolts.
->> ->> 12 point triple-square bit 10mm size - for starter bolts 9.45
->> ->> 12 point triple-square bit 12mm size - for head bolts 10.50 "
->> ->> 
->> ->> Ill just shutup now and get more cofee.
->> ->> 
->> ->> 
->> ->> ---
->> ->> ATS - Patrick Bureau -  Web site :
->> ->> http://ats.longcoeur.com]http://ats.longcoeur.com
->> ->> AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: 
->> ->> atsgtx@hotmail.com See what I am selling today on eBay: 
->> ->> http://tinyurl.com/22e5b
->> ->> 
->> ->>  
->> ->> 
->> ->> ->-----Original Message-----
->> ->> ->From: scirocco-l-bounces@scirocco.org 
->> ->> ->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of
->> ->Patrick Bureau
->> ->> ->Sent: Friday, March 26, 2004 7:01 AM
->> ->> ->To: 'T Berk'; stetson@unrealexpectations.ath.cx
->> ->> ->Cc: 'scirocco list'
->> ->> ->Subject: RE: Need to source a 11mm triple square and more
->> ->explicit
->> ->> ->3A
->> ->> ->
->> ->> ->Well because it is an 11mm bolt.
->> ->> ->
->> ->> ->16v PL headbolt : 027103385C -
->> ->> ->Vwparts lists it as 11x144mm headbolts :
->> ->> ->http://www.impexfap.com/partlist.cfm?getpart=5092&PARTNUMBERSE
->> ->> ->ARCH=027103385
->> ->> ->c#part5092
->> ->> ->
->> ->> ->
->> ->> ->8 v JH Headbolt : 049103384B - M11x1,5x96 Etka 
->> ->> ->Sci-85-01-03-05-00 Item # 12 Vwparts lists it as 
->11x96mm (all 8v exc 16v) :
->> ->> ->http://www.impexfap.com/partlist.cfm?getpart=4882&PARTNUMBERSE
->> ->> ->ARCH=049103384
->> ->> ->b#part4882
->> ->> ->
->> ->> ->
->> ->> ->---
->> ->> ->ATS - Patrick Bureau -  Web site :
->> ->> ->http://ats.longcoeur.com]http://ats.longcoeur.com
->> ->> ->AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: 
->> ->> ->atsgtx@hotmail.com
->> ->> ->See what I am selling today on eBay: http://tinyurl.com/22e5b
->> ->> ->
->> ->> -> 
->> ->> ->
->> ->> ->->-----Original Message-----
->> ->> ->->From: scirocco-l-bounces@scirocco.org 
->> ->> ->->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of T Berk
->> ->> ->->Sent: Friday, March 26, 2004 3:00 AM
->> ->> ->->To: stetson@unrealexpectations.ath.cx
->> ->> ->->Cc: scirocco list
->> ->> ->->Subject: Re: Need to source a 11mm triple square and more
->> ->> ->explicit 3A
->> ->> ->->
->> ->> ->->stetson wrote:
->> ->> ->->
->> ->> ->->> K then....
->> ->> ->->> 
->> ->> ->->> I'm sitting here, polishing off some Linguini 
->Carbonara con
->> ->> ->->Portabella
->> ->> ->->> w/ freshly grated Romano and FUMING!!!
->> ->> ->->> 
->> ->> ->->> The nice set of Allen/Torx/polygonal socket that cost me
->> ->> ->->$35 DOES NOT
->> ->> ->->> HAVE A 11mm triple square!!!!
->> ->> ->->> 
->> ->> ->->> Farging Bastiges!
->> ->> ->->> 
->> ->> ->->> And most of you know why I need it.
->> ->> ->->> 
->> ->> ->->> Head bolts.
->> ->> ->->> 
->> ->> ->->> Where can I get this ONE socket (preferrably in stock
->> ->and in 1/2"
->> ->> ->->> drive)?!?!?!?
->> ->> ->->
->> ->> ->->Headbolts ARE 12mm Twelvepoint. Tell me more why 
->you need an 11?
->> ->> ->->
->> ->> ->->"WhatChuTalkinAboutWillis?"
->> ->> ->->
->> ->> ->->TBerk
->> ->> ->->
->> ->> ->->
->> ->> ->->_______________________________________________
->> ->> ->->Scirocco-l mailing list
->> ->> ->->Scirocco-l@scirocco.org
->> ->> ->->http://neubayern.net/mailman/listinfo/scirocco-l
->> ->> ->->
->> ->> ->->
->> ->> ->
->> ->> ->
->> ->> ->
->> ->> ->_______________________________________________
->> ->> ->Scirocco-l mailing list
->> ->> ->Scirocco-l@scirocco.org
->> ->> ->http://neubayern.net/mailman/listinfo/scirocco-l
->> ->> ->
->> ->> ->
->> ->> 
->> ->> 
->> ->> 
->> ->> _______________________________________________
->> ->> Scirocco-l mailing list
->> ->> Scirocco-l@scirocco.org
->> ->> http://neubayern.net/mailman/listinfo/scirocco-l
->> ->> 
->> ->
->> ->--
->> ->============================================
->> ->84 Wolfsburg Edition TurboDiesel Scirocco
->> ->	http://scirocco.cs.uoguelph.ca/gtd
->> ->89 Audi 200 Turbo Quattro Avant
->> ->99 A3 Jetta TDI
->> ->============================================
->> ->
->> ->
->> ->
->> 
->> 
->> 
->
->--
->============================================
->84 Wolfsburg Edition TurboDiesel Scirocco
->	http://scirocco.cs.uoguelph.ca/gtd
->89 Audi 200 Turbo Quattro Avant
->99 A3 Jetta TDI
->============================================
->
->
->

References:
- Need to source a 11mm triple square and more explicit 3A
  - From: drew at scirocco.cs.uoguelph.ca (Drew MacPherson)

Prev by Date: Need to source a 11mm triple square and more explicit 3A
Next by Date: Need to source a 11mm triple square and more explicit 3A
Previous by thread: Need to source a 11mm triple square and more explicit 3A
Next by thread: Last MK1 R/C car body from Josh Hignight on E-bay
Index(es):
- Date
- Thread