[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

clutch problem



Indeed the self adjusting cable would of compensated for the missing bushign
and now that you have them back on  the adjustemtn is too tight and the
tranny never gets a chance to release the clutch to engage...

Quick test, take the bushings off and see if everythign comes back to
normal, if so, take 15$ and get a manual adjusting cable and replace it.


---
ATS - Patrick Bureau -  Web site :
http://ats.longcoeur.com]http://ats.longcoeur.com
AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: atsgtx@hotmail.com
See what I am selling today on eBay: http://tinyurl.com/22e5b

 

->-----Original Message-----
->From: scirocco-l-bounces@scirocco.org 
->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Derrick flo
->Sent: Friday, March 26, 2004 1:01 AM
->To: Don Walter; scirocco-l@scirocco.org
->Subject: Re: clutch problem
->
->o ok.  I don't have a manual adjust clutch cable.  mine is 
->self adjustable.
->I had it on there without the bushing and hardware on a 4K 
->tranny.  I replaced the trans with a ACD and added the 
->bushing and hardware kit so I might have messed it up with me 
->driving it with only the clip on it.
->
->
->----- Original Message -----
->From: "Don Walter" <dswalterwi@earthlink.net>
->To: "Derrick flo" <derrickmd18@verizon.net>; "Don Walter"
-><dswalterwi@earthlink.net>; <scirocco-l@scirocco.org>
->Sent: Thursday, March 25, 2004 7:47 PM
->Subject: Re: clutch problem
->
->
->> A quick way is by the play in your pedal.  There should not be much.
->>
->> Other wise here is the Bently method:
->> 1. Operate the clutch pedal several times.  Loosen the 
->cable locknut.
->> 2. Raise the clutch release lever by hand until resistance is felt.
->> 3. Adjust freeplay by turning the adjusting disc until the clearance
->between the adjusting disc and the transaxle housing is 12.0+/-0.3mm
->(.472+/-0.12in.)
->> 4. Tighten the cable locknut.  Freeplay at the clutch release lever 
->> should
->now be 6.0+/-0.3mm (.236+/-.012in.)  Torque the locknut to 36 
->to 48in. lb.
->>
->> HTH
->> Don
->>
->> -----Original Message-----
->> From: Derrick flo <derrickmd18@verizon.net>
->> Sent: Mar 25, 2004 11:36 PM
->> To: Don Walter <dswalterwi@earthlink.net>, scirocco-l@scirocco.org
->> Subject: Re: clutch problem
->>
->> how would I check that?
->>
->>
->> ----- Original Message -----
->> From: "Don Walter" <dswalterwi@earthlink.net>
->> To: "Derrick flo" <derrickmd18@verizon.net>; 
-><scirocco-l@scirocco.org>
->> Sent: Thursday, March 25, 2004 6:21 PM
->> Subject: Re: clutch problem
->>
->>
->> > Doesn't sound like your clutch is engaging completly.  
->Better check 
->> > the
->> adjustment.
->> >
->> > -----Original Message-----
->> > From: Derrick flo <derrickmd18@verizon.net>
->> > Sent: Mar 25, 2004 11:10 PM
->> > To: scirocco-l@scirocco.org
->> > Subject: clutch problem
->> >
->> > I just replaced my clutch and tranny and now it won't go 
->into gear 
->> > with
->> the car running.  With the car off it will go into every 
->gear.  I have 
->> to put the car in first gear then start it.  then it won't 
->go into any 
->> other gear.  when I push in the clutch it will disengage but I can 
->> still feel it engaged a little tiny bit. when its running 
->it won't go 
->> into any gear.  I have to force it in to a gear if it will 
->go and it 
->> will grind hard
->engaging.
->> Anyone know what the problem may be?
->> >
->> >
->> > ---
->> > Outgoing mail is certified Virus Free.
->> > Checked by AVG anti-virus system (http://www.grisoft.com).
->> > Version: 6.0.638 / Virus Database: 409 - Release Date: 3/21/2004 
->> > _______________________________________________
->> > Scirocco-l mailing list
->> > Scirocco-l@scirocco.org
->> > http://neubayern.net/mailman/listinfo/scirocco-l
->> >
->> >
->> > Don Walter - Waukesha, WI
->> > 1984 1.8 8V Pewter Scirocco (sold years ago)
->> > 1986 2L 16V Toronado Red Scirocco (under repair)
->> > 1988 1.8 16V Toronado Red Scirocco (for sale)
->> > 1986 1.8 16V Black Scirocco (my new ride)
->>
->>
->> ---
->> Outgoing mail is certified Virus Free.
->> Checked by AVG anti-virus system (http://www.grisoft.com).
->> Version: 6.0.638 / Virus Database: 409 - Release Date: 3/21/2004
->>
->>
->> _______________________________________________
->> Scirocco-l mailing list
->> Scirocco-l@scirocco.org
->> http://neubayern.net/mailman/listinfo/scirocco-l
->>
->>
->> Don Walter - Waukesha, WI
->> 1984 1.8 8V Pewter Scirocco (sold years ago)
->> 1986 2L 16V Toronado Red Scirocco (under repair)
->> 1988 1.8 16V Toronado Red Scirocco (for sale)
->> 1986 1.8 16V Black Scirocco (my new ride)
->
->
->---
->Outgoing mail is certified Virus Free.
->Checked by AVG anti-virus system (http://www.grisoft.com).
->Version: 6.0.638 / Virus Database: 409 - Release Date: 3/21/2004
->
->
->_______________________________________________
->Scirocco-l mailing list
->Scirocco-l@scirocco.org
->http://neubayern.net/mailman/listinfo/scirocco-l
->
->