clutch

[ryanruggles at uniserve.com (Ryan Ruggles)]

CAn someone tell me the torque numbers for the flywheel bolts? I don;t have
a manual and I am ready to put it back together.  I'll search the website in
the meantime.

Cheers

Ryan
----- Original Message -----
From: "T. Reed" <treed2@wsu.edu>
To: "Drew MacPherson" <drew@scirocco.cs.uoguelph.ca>
Cc: "Ryan Ruggles" <ryanruggles@uniserve.com>; <scirocco-l@scirocco.org>;
"Patrick Bureau" <ats@longcoeur.com>
Sent: Tuesday, March 23, 2004 1:59 PM
Subject: Re: clutch


> > You do NOT need to buy new flywheel bolts (these are the ones with the
> > 12pt 9mm head) as these are not TTY.  Clean 'em up and reinstall 'em,
> > being sure to torque to spec per the Bentley.
> >
> > Drew
>
> It's a good idea to put loctite on these, too (the removable kind) because
> when they back out they do a lot of damage to your tranny case (and
> they break pressure plate straps).. ask me how I know.
>
> I learned my lesson and always replace both sets of bolts..
>
> Cheap insurance.
>
> -Toby
>