clutch

[ats at longcoeur.com (Patrick Bureau)]

You need new pressure and flywheel bolts because they are stretch bolts.

---
ATS - Patrick Bureau -  Web site :
http://ats.longcoeur.com]http://ats.longcoeur.com
AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: atsgtx@hotmail.com
See what I am selling today on eBay: http://tinyurl.com/22e5b

 

->-----Original Message-----
->From: Ryan Ruggles [mailto:ryanruggles@uniserve.com] 
->Sent: Tuesday, March 23, 2004 10:46 AM
->To: Patrick Bureau
->Cc: treed2@wsu.edu; scirocco-l@scirocco.org
->Subject: Re: clutch 
->
->Cool, that's what i figured.  I just thought I'd ask.  Why do 
->I need new pressure plate bolts?  Also what size 12pt socket 
->are they.  I have to go buy one.
->
->Cheers
->
->Sorry about the lack of clarity Toby, I was half-cut while 
->writing my post last night :)
->
->----- Original Message -----
->From: "Patrick Bureau" <ats@longcoeur.com>
->To: "'Ryan Ruggles'" <ryanruggles@uniserve.com>; 
-><scirocco-l@scirocco.org>
->Sent: Tuesday, March 23, 2004 3:41 AM
->Subject: RE: clutch
->
->
->> Well tyo know if it is your main seal, you will continue 
->dissembly of 
->> the pressure plate from the car (you did get new bolts 
->right?) and you 
->> will
->find
->> it behind it.
->>
->> As for the rod, yes this is normal as the clutch plate is no longer 
->> there
->to
->> push back on it.
->>
->>
->>
->> ---
->> ATS - Patrick Bureau -  Web site :
->> http://ats.longcoeur.com]http://ats.longcoeur.com
->> AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN:
->atsgtx@hotmail.com
->> See what I am selling today on eBay: http://tinyurl.com/22e5b
->>
->>
->>
->> ->-----Original Message-----
->> ->From: scirocco-l-bounces@scirocco.org 
->> ->[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Ryan Ruggles
->> ->Sent: Tuesday, March 23, 2004 2:53 AM
->> ->To: scirocco-l@scirocco.org
->> ->Subject: clutch
->> ->
->> ->ok so I got the tranny off.  Inside the bellhousing is 
->soaked bu the 
->> ->inout shaft looks pretty dry.  Is it the rear amin seal?  Also I 
->> ->notied when I had the trnny out pulled up on the 
->clutch/shift lever 
->> ->on the tranny and I noticed the shift rod didn; retract 
->after I lt 
->> ->go of the shift lever.  Is that normal or is that why my 
->clutch was 
->> ->slipping?
->> ->_______________________________________________
->> ->Scirocco-l mailing list
->> ->Scirocco-l@scirocco.org
->> ->http://neubayern.net/mailman/listinfo/scirocco-l
->> ->
->> ->
->>
->>
->>
->
->
->