[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Replacement crossmember
Thnks, Eric, I think you are right about it not being the time or effort
to this mod...
Camron D. Crouse said:
I think, from going through the archives, someone had said they were
> going to drill an additional hole into the bumper supports, and weld a
> compatible *bolt* to the inside of the bumper arms,
Oops, meant *nut*, not bolt.
- Camron from Vancouver, WA USA
'86.5 Black 16V 2.0L
Eric S wrote:
>Only being able to use one bolt on each side is specific to the mk2
>rocco...they are by far, the most "different" of the A1 chassis cars.
>
>Regardless, one bolt is enough, and has been proven time and again. ONE
>of my customers so far spent the time on his mk2 to drill holes for the
>rear bolts...you'll actually see on your car where they were welded shut
>at the factory. Honestly, I don't think its worth the time or effort.
>Pivoting is not possible with the way it bolts in behind the front motor
>mount cup.
>
>
>