various Scirocco stuff

[vwnuts at yahoo.com (Anthony Pelletier)]

An air chisel with a long bit can get rid of this in
like 2 seconds..  We have a 24" bit we call the "cat
eliminator"....  


--- David Utley <fahrvegnugen@cox.net> wrote:

> 
> > 
> > From: "C Boyko"
> <roccit_53@scirocco.cs.uoguelph.ca>
> > Date: 2004/07/29 Thu AM 08:59:05 EDT
> > To: scirocco-l@scirocco.org
> > Subject: various Scirocco stuff
> > 
> > 
> > OKay, just a few things, nothing earth shattering.
> 
> > 3. The 16V. Well, it had it's "catectomy"
> yesterday, and the cat wasn't
> > broken or melted inside as I'd suspected, but
> there isn't a lot of light
> > shining through it either, there's a fair amount
> of linty looking crap in
> > it. Anyway, it's off for now, I'm gonna have to
> cook up something since
> > the straight pipe won't pass the visual, so any
> suggestions are welcome.
> 
> In case you had not already thought of it, you can
> push all the catalytic material out with a piece of
> wood and a hammer.  Get something narrow enough to
> fit through one of the holes, and hammer away.  The
> stuff will give way eventually.  I had to do this on
> my 77 Camper, and it REALLY needed it.  The material
> was loose in the cat.  Turn left and it would slow
> down, turn right, and it would get faster...  :-)
> 
> HTH
> 
> David
> 
> 
> ---Chrome don't get you home.---
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com