FS: My car '88 20v 1.8t

[richdeede at scirocco20v.com (Rich Deede)]

I just posted this on Vwvortex....

As most of you know, I wrecked my car at the Scirocco.org gathering the first weekend of June in Ohio. My original plan was to buy another scirocco and swap my motor and all my parts over, as the only major damage was done to the body of the car and not anything mechanical. Well after really thinking about it, I have realized that financially I cant afford to rebuild this car. It wasnt an easy decision but its what I really should do. 
So with that in mind, I will be selling off the car and all the parts I have for it. I will sell the entire car or part it out. I will not part out engine pieces. I am selling the engine along with the wiring as a complete functioning unit. The engine runs perfectly and I start it every few days. This would be ideal for an A1 or A2 but even more so for a Scirocco as this would literally drop right in with no thought involved. 

The following is everything that I have. I would like to sell the entire car as one with everything included or the entire drivetrain bolted to the car. If theres no takers for the car, I will part out, so let me know what you are interested in. If you are serious about the car or the entire drivetrain, please let me know and we can discuss further. I can be somewhat flexible and work with serious buyers. I am looking for $4000-$5000 for the entire car with all spare parts. This will vary, depending on exactly what you want. I am asking $2000-$2500 for the entire intact drivetrain along with the shell, again depending on what exactly we work out. Again, I am very willing to work with serious buyers.

Engine/Trans
-98 AEB 1.8t 20v motor (Audi, approx. 60k miles)
-Factory Audi Intercooler
-K&N open intake
-forge diverter valve
-engine fully wired for Vag-com diagnostic capabilities 
-low temp fan switch 
-low temp thermostat
-new timing belt (2k miles)
-2h trans(shifts well w/ redline fluid)
-ABD short shifter

Exhaust
-custom bent 2.5" exhaust 
-custom center exit muffler
-custom ceramic coated downpipe
-removed cat

Suspension
-H&R Sports
-Bilstein Shocks
-DTM lowering spring caps/strut mounts
-Autotech hollow rear say bars front and rear
-8v polished upper front stress bar
-all suspension bushings are polyurathane

Wheels/Brakes
-16x7.5 ABT A22's w/Kuhmo Ecsta Supra 712's
-10.1" Brembro vented front rotors with Hawke Pads
-Stainless steel lines

Interior
-Full leather interior
-leather split folding rear seat
-Custom front door cards with 6" speaker enclosures
-Momo Race 320mm Steering wheel
-Uncracked dash(canadian version with passenger side knee bar)
-3 gauge panel w/boost, oil temp(not hooked up), and volt guages

Exterior
-European Headlights(most adjustors cracked but all glass perfect)
-driver side clear european turn signal(passenger side smashed)
-European Bumpers
-Kamei X-1 Side skirts 
-kamei X-1 rear valence - U.S. (custom cut for center exit exhaust also has slight damage but repairable)
-Kamei X-1 rear valence - Euro (unpainted, never installed)

Extra Parts
-extra factory ECU
-Extra fuse box
-stock US Bumpers
-Excellent condition tear drops with winter tires(4)
-Turbo XS Diverter Valve
-3 MAF sensors
-1 coil pack
...plus countless other random parts and all other parts on the car(ie. sunroof, doors, glass, etc...)


please see http://www.scirocco20v.com for more pics


-Rich
1988 Scirocco 1.8t