need part number & source

[calimus at techography.net (calimus@techography.net)]

Mike,

     Thanks for the info, another lister e-mailed me something very close to
what you said yesterday.  I'm going to pass this info along and tuck it away
myself as it's one of those things you don't think of as being hard to find
durring a build.

William


Quoting Mike Potter <Potterman@parts4vws.com>:

> William,  The bearings have to sized by a machine shop & then pressed into
> the block. If that was not done they will not work correctly.
>
> You will NEVER find those bearings on the ETKA.....they do not list as a
> separate part from VW. To get them from VW you would have to buy an engine
> block!
>
>
> Mike Potter
> Virtual World Parts Inc.
> Sales@parts4vws.com
> 909-694-8600x103
> 888-389-7278x103
>
> -----Original Message-----
> From: scirocco-l-bounces@scirocco.org
> [mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Calimus
> Sent: Sunday, July 11, 2004 6:13 PM
> To: Scirocco-l
> Subject: need part number & source
>
>
> Fellow lister needs the part number for the intermediate shaft bearing thats
> right behind the gear.  He ordered one but it appears to be the wrong one as
> when he goes to remove the shaft it stays on the shaft.  I think he got the
> current set from the potterman but I'm not sure.  I tried looking it up in
> the etka, but was unable to find it.  Then again, I might just have crappy
> etka skills.  BTW, this is for a 2.0L 16v.
>
> Any help would be greatly appreciated.  Oh, and is it just me or has there
> been virtually no list traffic over the weekend?
>
> William Snyder
>
> 88' Scirocco 16v
> 89' Cabriolet 8v
> 71' Karmann Ghia
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>