[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

How to extract CIS box harness through mk1 rain tray?



that's definitely the route I'm taking, but I'm finding the mk1 fusebox is
not as modular as the later mk2 box....had to stop for the evening because
1) digital camera ran out of batteries  2) wife's friend pawned off their
kid on us so they could go see Spiderman <rolleyes>

The Babysitter
----- Original Message ----- 
From: "David Utley" <fahrvegnugen@cox.net>
To: "Jeff Toomasson" <area53@validpath.com>; "Ron Pieper"
<rapieper@yahoo.com>; "Brett Van Sprewenburg" <brett@netacc.net>
Cc: "The Scirocco List" <scirocco-l@scirocco.org>
Sent: Friday, July 02, 2004 7:54 PM
Subject: RE: How to extract CIS box harness through mk1 rain tray?


>
>
> -----Original Message-----
> From: scirocco-l-bounces@scirocco.org
> [mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Jeff Toomasson
> Sent: Friday, July 02, 2004 6:11 PM
> To: Ron Pieper; Brett Van Sprewenburg
> Cc: The Scirocco List
> Subject: Re: How to extract CIS box harness through mk1 rain tray?
>
> This is what I'm talking about:
>
> http://validpath.com/images/81s/connector.JPG
>
> Can you take it apart and get a bit more room that way?  I realize that
the
> outer part of the connector will really be stressed by squishing it, but
> hopefully it will come back to shape.  Also, if you can not make the one
big
> connector go through the hole, what about going the other way and feeding
> all the rest of the wiring through it?
>
> Just a couple of thoughts...
>
> David
>