aligning the exhaust

[ats at longcoeur.com (Patrick Bureau)]

Yes larry that made a whole lot more sense..

Put the acetylene bottle down, step away from the torch..
You need some down time....  


ATS - Patrick Bureau -  85 2L, 102.5 whp, 121 ft/lbs torque
Email : ats@longcoeur.com - Web site : http://ats.longcoeur.com
AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: atsgtx@hotmail.com
1975, 77, 78, 79, 80, 81S, 82 and 86 scirocco's coming soon!
 
-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of L F
Sent: Sunday, February 22, 2004 8:42 AM
To: Patrick Bureau; 'T. Reed'; scirocco-l@scirocco.org
Subject: Re: aligning the exhaust

OR....
Mark the pipe where it sits on the beam... Pull pipe out... Pull rear axle
out...
Take acetylene torch/plasma cutter/grinder/file and notch the beam.
That way you don't affect exhaust flow.
That's what I'd do...
(not really, but that's what I recommend YOU do...)

Larry
  ----- Original Message -----
  From: Patrick Bureau
  To: 'T. Reed' ; scirocco-l@scirocco.org
  Sent: Sunday, February 22, 2004 5:19 AM
  Subject: RE: aligning the exhaust


  Mark the pipe where it sits on the beam... Pull pipe out... Take BMFH and
  make a dent at the mark so it does not rattle anymore. 


  ATS - Patrick Bureau
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l