[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bentley and mounts...



Mike,
 Crawl under there and you will see that R&R'ing the rear mount is pretty
straightforward.  The only thing to remember is that it's easiest if you
remove that part of the mount that bolts to the trans with three bolts
first.
Oh, and use a torque wrench when you re-install.

Larry
sandiego16v


----- Original Message ----- 
From: "Mike Smith" <smithma7@yahoo.com>
To: "car" <scirocco-l@scirocco.org>
Sent: Saturday, April 10, 2004 10:30 PM
Subject: Bentley and mounts...


> Please correct me if I am wrong, but...
>
> I went through the entire index last night and the only thing I found
regarding motor (tranny) mounts is the (small) section on adjusting them if
the motor, etc. is not aligned properly.
>
> Is there no section in Bentley regarding the replacement of said mounts?
>
> Mike
> '86 red 16v
>
>
> word (w?rd)
> interj. Slang. Used to express approval or an affirmative response to
something. Sometimes used with up. Source
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Tax Center - File online by April 15th
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l