Crank plugs

[pats16v at columbus.rr.com (Erik)]

If you go to Sears or NAPA you can get an Easy-Out.  You drill a hole
through the center of the broken tap and crank on this thing til it comes
out.  The threads a reversed so the more you turn it Counter Clockwise the
tighter it gets.  I have used these a ton of times and always had good luck
with them.  HTH

Erik
----- Original Message ----- 
From: "shawn f" <falzsf@mts.net>
To: "scirocco list" <scirocco-l@scirocco.org>
Sent: Friday, September 26, 2003 4:51 PM
Subject: Crank plugs


Well a problem already. I broke a gaddam tap in the last plug hole i was
tapping. I don't know how the hell i will get it out. Any ideas?
Ahhhhhhh........Those tap are strong can't seem to drill it out.
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l