control arm bushings

[tomc at satx.rr.com (tomc)]

I have Poly's on "The Project" worst part about them is they are noisy.
I replaced the bushings, ball joints, and tie rods in one swoop so I
couldn't tell you how much better over stock it is, however the whole
package made a huge difference in handling over the old worn parts.

Just press the poly's in, the hardest is getting the old bushings out.
Just cut them up, mangle them whatever just spare the a-arms. I also
cleaned my a-arms real good then coated them with por-15. they look good
too.

Hope that helped somewhat,
-- 
TomC
'79 "The Project" Scirocco