Coolant LED Flashing? A new twist....

[txrocco at sbcglobal.net (ATS - Patrick Bureau)]

that would explain the flashing (warning low coolant level)
as far as I know, if the wires are together (closed circuit) the flashing
should stop, as the sensor dips 2 rods into the coolant (it creating the
short through the liquid)

I would try patching both wires together and see if it stops it!

ATS - Patrick Bureau - txrocco@sbcglobal.net
----------------------------------------------
MSN:ATSGTX@hotmail.com |YAHOO:ATSGTX@yahoo.com
ICQ:32918816           |AIM:Texasscirocco
----------------------------------------------


=>-----Original Message-----
=>From: scirocco-l-bounces@scirocco.org
=>[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Ken B
=>Sent: Thursday, September 18, 2003 9:36 AM
=>To: scirocco-l@scirocco.org
=>Subject: Re: Coolant LED Flashing? A new twist....
=>
=>
=>My coolant LED also flashes.  But.... I have the full 16v
=>engine/harness but
=>with the simpler MK1 Radiator (no overflow bottle)
=>So, I have the plug that would go to the expansion bottle.  I'm
=>sure therein
=>lise the problem, but what would be the best way here?  Nip of
=>the plug end
=>and "short" the two wires together?  Or am i misunderstanding what the
=>wiring needs to "see" from that plug?
=>Ken
=>'79 Scirocco 16V "McFly"
=>"81 Diesel P/U
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l