[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Coolant LED Flashing?



I will go check it right now!
Thanks, Rick.
 
-----Original Message-----
From: Anson Clement [mailto:ansonivan@yahoo.com] 
Sent: Sunday, September 14, 2003 5:14 PM
To: Rick Kellner; scirocco-l@scirocco.org
Subject: Re: Coolant LED Flashing?
 
Check the two braided fuel lines that run to your control preasure
regulator, they run right by your collant temp sensor on the front of
the block if the spade terminal has lost it's little plastic protector
those lines may touch the connector, grounding the sensor signal and
causing the light to stay on.
 
My 8v did this shortly after I bought it.
 
Anson

Rick Kellner <rfkellner@snet.net> wrote:
The led on the coolant temperature gauge on my 8v started flashing and
won't turn off. It flashed during startup and continued to flash as the
temperature rose to normal. Water level looks fine as well as
everything else. Any ideas?
Thanks, Rick Kellner.
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l
  _____  

Do you Yahoo!?
Yahoo! <http://us.rd.yahoo.com/evt=10469/*http:/sitebuilder.yahoo.com>
SiteBuilder - Free, easy-to-use web site design software