Airflow sensor

[jdbubb at ix.netcom.com (Dan Bubb)]

The air flow sensor body should have a plug that can be remove to gain
access to the adjustment screw.
I'd guess the unit is just not adjusted for your car and that knocking out
the plug and adjusting the screw will do it.
Dan

----- Original Message -----
From: tomc <tomc@satx.rr.com>
To: Texas Scirocco Team <TST@yahoogroups.com>; Scirocco list
<scirocco-l@scirocco.org>
Sent: Saturday, September 06, 2003 5:48 PM
Subject: Airflow sensor


> Hey all,
>
> I tried to put the larger airflow sensor "The Project" today. I couldn't
> get it to work. Here's what I did: I removed the fuel dizzy on the
> larger afs, as it has the provision for the lamba circuit which I don't
> have yet. I put my fuel dizzy on the afs and hooked everything up. At
> first I could start the car and it would run as long as I kept my foot
> on the gas, after some playing though it wouldn't start at all. I put my
> old afs in and it started right up.
>
> Any idea's?, Are the plungers different? There's no hole for adjustments
> on the new afs.
>
> TIA
> --
> TomC
> '79 "The Project" Scirocco
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l