control arm and ball joint action

[scirocco at powerlink.net (John C. Worden)]

You don't have to get it aligned, but if it is worn out it might not be a 
bad idea.
If it's bad enough, and you are in alignment right now, it could be off a 
bit when
you put the new stuff on.

John



At 02:00 PM 10/16/03 -0400, Calimus wrote:

>I just want to be sure since I haven't done this before, but if I
>replace my lower control arms and ball joints, I should "Not" have to
>get the car re-aligned correct?
>
>I just can't see that new control arms and ball joints effecting the
>alignment enough to cause a problem.  But who the hell am I to know for
>sure?  SO I'm asking you guy's gals, lemmie know since I want to try and
>do this sometime over the weekend.  Oh, yes I do have all new control
>arm bushings, and no I dind't think to get new sway bar bushings.
>
>William
>--