Inner CV seperation questions, HELP!!!!!

[amalventano at sc.rr.com (Allyn)]

whack the outer cv housing (cylindrical section between the tranny cup and
the boot cup) with a hammer. hitting it from the side usually works just
fine. rotate the shaft as you hit it to alternately hit from side to side.
hth
Al

----- Original Message ----- 
From: "Jason Rinne" <rinne_jason@hotmail.com>
To: <scirocco-l@scirocco.org>
Sent: Saturday, November 29, 2003 10:02 PM
Subject: Inner CV seperation questions, HELP!!!!!


> Hey All,
>
> In the midst of a motor swap from my lowly 1.7 to a hydro 1.8 and after
> pulling the bolts from the driver's side short drive axle it won't pull
out
> of the drive flange. I'd never had this problem. It appears to have been
> rebuilt with a new boot since the cap/boot came right off the CV and
grease
> flowed out of course! :-(
> What can I do to get it to come out of the flange without damaging
> anything??????
>
>
> Thanks,
> Jason Rinne
> 82 Rocco
> Bellingham, WA
>
> _________________________________________________________________
> Need a shot of Hank Williams or Patsy Cline?  The classic country stars
are
> always singing on MSN Radio Plus.  Try one month free!
> http://join.msn.com/?page=offers/premiumradio
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l