MOMO Race Steering wheel help

[jarrett at rpa.net (Jim Jarrett)]

On 11/5/03 8:53 PM, "peter" <peter@thescirocco.com> wrote:
> Hey Jim,
> 
> The horn button fits into the silver ring to the lower right in this
> picture: http://store4.yimg.com/I/shopmomo_1766_7603031
> 
> The ring and horn button assembly, then gets sandwiched between the hub
> and the steering wheel.

Yes.  That is the only way the parts fit together.  But then the horn button
is inset from the outer trim ring that gets bolted to the front of the
steering wheel, and it seems much more like it should be flush to that ring,
not the face of the wheel.


/===============================================================\
| Jim Jarrett,Rochester NY      '93 Passat GLX, '84 Scirocco    |
| mailto:jarrett@rpa.net         '81 Rabbit Convertible 16v     |
|                                                               |
|    Any problem can be solved with the proper application of   |
|   Force, Heat, Chemicals, or Money.                           |
\===============================================================/