[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Vibration = tranny?



Gee, Chris, relax.
It's not that important.  

Larry
sandiego16v
  ----- Original Message ----- 
  From: Chris DeLong 
  To: rocco16v@netzero.net ; amalventano@sc.rr.com ; mkii@nycap.rr.com ; scirocco-l@scirocco.org 
  Sent: Wednesday, May 28, 2003 6:26 PM
  Subject: Re: Vibration = tranny?


  Ok two more things then.

  1. IF you worked on as many VW's every day for as long as I have then I 
  would consider your statement to be slightly noteworthy
  2. I would VERY much like to know where you got the info that REMAN (short 
  for REMANUFACTURED) axles come with NEW joints. I would also like you to 
  explain how it is then that REMAN axles with NEW joints have not been heat 
  treated like NEW GERMAN joints.


  Basically I have put lots of reman axles in a few cars. Mostly at the 
  customer request even though they were advised not to. I have also had to 
  take them out and put replacement ones in frequently. I think it comes down 
  to the bottom line that people like the ease of swapping out and axle with 
  known crap as opposed to taking the original axle out and taking the joints 
  off and cleaning/inspecting/replacing as neccessary. I have NEVER had a 
  German new joint bad out of the box. I have personally owned 6 bad reman 
  axles in the time span of 7 months on one car that was not drivne very hard 
  at all. If you actually sit down and do the calculations you will find that 
  a new joint is only about 60$ per joint (2 per axle) and they come with new 
  boots. Yes, those are NEW German parts. So for an extra bit of your time and 
  about 50$ you get something that will last an easy 60k miles of hard 
  driving. Show me that ratio with a reman axle. I dare ya.


  To those taht have reman axles in your cars. No offense. Jsut trying to 
  offer up some factual information regarding these bastard parts.



  Chris DeLong
  Fine Tuning
  206.367.5503
  www.finetuningperformance.com
  Seattle, WA USA





  >From: "L F" <rocco16v@netzero.net>
  >To: "Chris DeLong" <green536@hotmail.com>, 
  ><amalventano@sc.rr.com>,<mkii@nycap.rr.com>, <scirocco-l@scirocco.org>
  >Subject: Re: Vibration = tranny?
  >Date: Wed, 28 May 2003 16:22:58 -0700
  >
  >That's a pretty broad statement.  Tens of thousands of people have used 
  >remans and are satisfied with them.  You can always get some defective 
  >units, make no mistake, but if you consider that remanufactured axles have 
  >NEW CV JOINTS on them, they have to be an option.
  >
  >Larry
  >sandiego16v
  >   , reman axles are BAAAAAADDD!!
  >
  >   Chris DeLong
  >
  >_______________________________________________
  >Scirocco-l mailing list
  >Scirocco-l@scirocco.org
  >http://neubayern.net/mailman/listinfo/scirocco-l

  _________________________________________________________________
  MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
  http://join.msn.com/?page=features/virus


  _______________________________________________
  Scirocco-l mailing list
  Scirocco-l@scirocco.org
  http://neubayern.net/mailman/listinfo/scirocco-l