[TECH] Question about the Euro GTI Oil Flange

[drew@scirocco.cs.uoguelph.ca (Drew MacPherson)]

The newer flange is taller, and the gasket is metal.  The new flange has 
an oil port where the top bolt hole is on the old one.

Drew

On Mon, 24 Mar 2003, Euroroc II wrote:

> Is there an easy way to identify the difference?
> 
> -Raffi
> 
> 
> At 01:44 PM 3/24/2003 -0500, BFDEIHL@aol.com wrote:
> >Since we are on the topic of Euro GTI oilcooler flanges I may have a line
> >on one of these and since I need to replace both oil cooler lines from the
> >sandwich plate anyway I found myself wondering will one of these fit a 16V?
> >
> >
> >The flange fits all 1.8-16V and the 2.0 blocks made prior to 92-- midway
> >through 91 VW changed the "footprint" of the oil flange on the 9A block-- the
> >Euro flange does not bolt up to the later blocks...
> >
> >_______________________________________________
> >Scirocco-l mailing list
> >Scirocco-l@scirocco.org
> >http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 

-- 
/=============================================\
|  84 Wolfsburg Edition TurboDiesel Scirocco  |
|    http://scirocco.cs.uoguelph.ca/gtd       |
\=============================================/