interesting coolant stuff

[brian_wagner@sbcglobal.net (brian_wagner@sbcglobal.net)]

Allyn,

Smack yourself in the forehead and run 30% coolant, this I what I run and
the only reason is for rust inhibitors. The more coolant you run the hotter
the engine will run. Oh run distilled water it keeps you from getting
scales, and never run over 50% coolant.

Brian
----- Original Message -----
From: "Allyn" <amalventano@sc.rr.com>
To: "scirocco list" <scirocco-l@scirocco.org>
Sent: Sunday, March 23, 2003 8:45 PM
Subject: interesting coolant stuff


> ok, so i fixed a hose on the rieger today, and decided to do some flush
> action. flushed system, and actually threw some antifreeze in there this
> time (i usually run just water). i went with about 60% antifreeze mix. now
> check this out:
> temps prior:
> water - centered over led, max of 3/4 when fan turns on.
> oil - normally 90-100 when moving, peaking at 110 during extended idle in
> traffic, but will settle back to 100 if a/c is turned on low (due to
> radiator fan running in slow).
> temps after:
> water - towards upper part of led.
> oil - minimum 100 when moving (more like 105), gets to 110 pretty fast,
> stays at 110 even with a/c on low.
>
> i realize antifreeze doesnt cool as well as water, but is it THAT much
> worse?
> also, could it be that all is good, but the antifreeze is raising the
> boiling point, so where the system was incapable of going much over 100c
> before, now it can more easily?
>
> all other parts of cooling system are still working perfect, fan operates
on
> its own. nothing was done to tstat, etc.
>
> whatcha think? should i thin out the mix? what is the absolute minimum i
> should run to ensure the proper protection that antifreeze is supposed to
> provide? (as far as lubrication, etc).
> Al
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l