removing the ecu and knock box

[rhock99@epix.net (Ryan H)]

One nut holds it down on the front driver side edge, then just pull on it really hard (be careful all the wires) straight out.  It's held in by two snap in thingies (don't know how else to describe them), one on each back edge, that just pop in and out of place.  To put it back in, easiest thing is to use a screwdriver on the bracket and just tap it with a hammer.
> 
> From: der flo <derrickmd18@juno.com>
> Date: 2003/03/11 Tue PM 07:16:22 EST
> To: scirocco-l@scirocco.org
> Subject: removing the ecu and knock box
> 
> Anyone know how to remove the bracket that holds the ecu and knock box
> in?
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>