Aftermarket FPR question...

[vwnuts at yahoo.com (Anthony Pelletier)]

Ron,
If you buy the ross machine rail you can get an
adapter to run a stock digifant fuel filter.  If you
are using megasquirt, will you need the adjustable
fpr?  If you do need the adjustability the rail comes
out in -6 fitting so you can pretty much run any fpr &
mount it where its convienient.  

Tony
--- Ron Pieper <rapieper@yahoo.com> wrote:
> Hey all...
> 
> Looking into getting an adjustable fuel pressure
> regulator for my upcoming Megasquirt system.  I
> don't have the fuel rail purchased yet.  Logic tells
> me that I should be able to get a generic
> adjustable FPR, mount it on the firewall or similar,
> connect the pressure and dump fittings, and
> run the output to the rail.  Of course I'd install a
> filter and maybe a gauge.
> 
> I see aftermarket FRPs but the makers generally list
> them as for Acura, Honda, BMW, whatever. 
> Isn't this a case of an FPR is an FPR?  Just connect
> it, adjust it, and go?
> 
> Eddycate me here!
> 
> Thx, 
> 
> Cheapass Ron
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> http://sitebuilder.yahoo.com
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com